Jefferson combustion systems Electro valves

Electro valves for combustion systems are Industrial devices that guarantee right and safe functioning of high and low pressure tubes.

These are able to control precisely, flawlessly and without the waste the pass of fluids, vapors and gases, guaranteeing you can transport fuels, prime materials and food in a simple, effective and efficient process.

That’s why its use in the industry is key for transport and process optimization.

Do you want to know how industrial valves work?

Would you like to know the existing types of combustion system valves and their importance?

Do you need to apply a basic maintenance to electro valves and you don’t know how?

Do you want to buy combustion system valves in USA?

In this article we will show you all you need to know about these industrial valves and where you can find the best price catalog for you to choose.

What industrial electro valves are?

It’s an electro mechanic valve to control the flow of fluids, gases and vapors throughout the tube.

These are equipped with two different units:

The electromagnetic piece: it is composed of a solenoid with its respective plunger in charge of converting electrical energy into mechanic energy by means of magnetism in order to drive the valve.
The body of the electro valve: it includes one or more ports and one or more passes.

In most of the cases, this kind of combustion system valves offer two positions, closed and open.

How Jefferson Electro valves work in combustion systems?

They work controlling positive flow of materials by means of a plunger that goes up or down in order to let the liquid, gas or vapor go or stop.

This operation is performed in a plastic sleeve connected to a coil the drives the system by electric power.

It is noted that a return spring is in charge of pressing the plunger against the hole, which blocks the flow.

Types and models of industrial combustion system valves

In the market you can find a lot Jefferson combustion system valves modules, all available according to your needs.

And these types are categorized according to the number of ports and their use.

Get to know each category.

According to the number of ports

There are solenoid valves with 2, 3, 4 and ways.

Two-way valves are the most common and their connection has a direct entrance and exit which means it controls the flow in one way only. These are driven directly or by the pilot.

Three-way valves or tee multi-valves, these are equipped with three ports and it is recommended for processes where recirculation of the material it’s vital in order to mix, diverse or divide the flow between two lines.

Four-way valves these are used in AC and heating pump systems, where a change of course flow its required in a more specific way.

Five-way valves these are equipped in most of the cases with two positions or exits which guarantees a better regulation and control of the flow speed.

According to its use

According to its use, they can be mono-stable or bi-stable.

Mono-stable electro valves are those that return to the determined position once the signal is deactivated.

It is noted that this determined positions classify various types of mono-stable valves: Normally closed, Normally open, Divergent, Convergent and Universal.

Bi-stable electric valves these don’t have a determined position, which means when the signal is deactivated, they stay in the same position.

Importance of electro valves in the industry

Did you know that without a valve it is impossible to stop, free, distribute, dose, mix and control the flow of fluids, vapors or gases in a system?

This remarks its importance on industrial applications, where you need an exact control of the flow throughout the circuit.

Use of combustion system valves

The applications and uses of Jefferson electric valves are very wide, since it covers industrial uses related to control processes, startup and shutdown of plants, and a lot more applications.

In addition, it’s used to control the flow of gases and fuel oils, as natural gas, propane gas and heavy oils.

Some examples of its uses are:

Security of internal combustion industrial equipment.
Boiler rooms.
Furnaces
Oil and petrochemical industrial equipment.
Drinks and oil automatized pumps.
Irrigation systems.
Fields.
Dancing water fountains.
Oxyacetylene welding equipment.
Electric welding made at inert atmosphere.
Fire extinguish industrial system.
Gases and liquids dosing.
Gas systems.
Air heating systems.
And much more.

How Jefferson electro valves are replaced?

When an electro valve for a combustion system gets worn or damaged it is time to replace it.

It is important to remember that doing this on time may reduce great failure costs in the process and guarantee a better performance on daily labors.

Now good, how a solenoid valve must be replaced?

In order to do this the right way you need the manual that specifies what kind of electro valve is in place so you can choose one of the same model.

It is very important to place it in a horizontal tube where the coils are vertical.

This way you guarantee an optimal functioning.

Now, not in all cases it would be needed to replace the part. You may only need some maintenance in order to have a better functioning.

Let’s see how to do it.

Basic maintenance of electric valves

The first thing you must check in order to perform the maintenance of Jefferson valves in United States is checking for no leaks when the piece is closed.

This check should be performed during the initial startup of the electro valve.

In addition, you will have to check the curve corresponding to the intensity of consumption in the startup.

It is noted somebody valves take from seconds to minutes to start, so if they take too long, you should know they have to be replaced.

Where to buy electro valves in Unites States?

In case your valve needs to be replaced, at IndusCo. SpA, we have the best types of electro valves, the best quality in the market so you can replace your own.

Our Jefferson combustion products are characterized by delivering the best performance in the most challenging conditions of the industry.

In, addition we have more than 30 years of experience bringing solutions to our clients, so you can be sure that getting your combustion valve from us is the right choice.

All of our parts offer:

Modern, resistant and innovative design.
Best quality and durability materials.
Long life span and reliability in your operations.
Low Environmental impact.
Precise control of liquids, vapors and gases.

Do you want to buy valves at good prices? Contact us.

What you must take into account when buying valves?

In this case you don’t know how to choose the ideal valve for your use, we will show you.

With this information we can recommend the ideal part.

Valve application.
Size and type of connection.
Type of fluid to be transported.
Fluid external temperature.
Differential pressure.
Voltage.
Required flow.
Seal material.
Body material.
Orifice size.
Environment temperature.

With this information at hand, give us a phone call and we will take care of recommending the best electro valve for you.

It is noted that, if you are not able to define your replacement with this information, you can get in touch with us and we will help you to define it,

Jefferson combustion products: quality valves

At your disposal there is the Jefferson product catalog so you can see all the electro valves available in our inventory for you

This catalog offers basic and technical information of our products, so you can choose the best part without issues.

The ideal product for you is at the reach of your hand.

Optimize, control and dose your flow with the best combustion electro valves on the market: Jefferson Electro valves.

Request information about your product

Are you looking for a specific product? Contact us and we will help you. We have a wide range of products and above all with excellent prices.