Exclusive Representatives of Jefferson Valves in Chile
IndusCo. SPA is the exclusive representative of Jefferson valves in Latin America, Central America, and the Caribbean. We sell products directly from the factory. Inquire about your Jefferson valve.
Official Sales of Jefferson Valves in Chile
IndusCo. SPA has over 30 years of experience and has established itself as one of the leading companies in the region, meeting the demands and needs of hundreds of industries, technicians, and engineers by offering top-brand and high-quality products. Find and purchase Jefferson products at the best prices on the market. We offer solenoid valves, level controls, and all kinds of products for industrial automation. We are official distributors of world-renowned brands for the optimization of industrial processes such as Danfoss, Dynex, Asco, among other prestigious global brands.
Supplier of Jefferson Products and Valves in Chile
At IndusCo. SPA, we are dedicated to the wholesale and retail marketing of products and accessories from the Jefferson Valves brand for different uses and applications in the global market. We have an extensive catalog of Jefferson products and distribute throughout Chile and Latin America. We are located in Chile, in the Federal Capital, from where we cover the demand of hundreds of clients across the country.
Jefferson Valves Distributor: Products and Applications
Lead-Free
Cornell began making pumps for agriculture when the company was launched in 1946. Since then, Cornell engineers have continued to innovate in pump design and performance. Exclusive features of Cornell pumps, such as Cycloseal, Run-Dry®, and Redi-Prime®, allow Cornell pumps to handle the most demanding applications. These features, along with efficiencies of up to 89%, are why Cornell is considered the benchmark in agricultural pumps.
Water, Air, Inert Gases, and Light Oils, up to 176F
Direct-acting and pilot-operated, normally open and normally closed, brass or stainless steel body (option available), connections from 1/8″ to 3″, wide range of pressure ratings, Buna N seats, and seals (neoprene, EPDM, PTFE, and FKM available).
Steam and Hot Water, up to 356F
Handles high-temperature fluid challenges. Class H coils for high temperatures help provide extended, reliable service life. Direct-acting and pilot-operated, normally open and normally closed, brass or stainless steel body (available), connections from 1/8″ to 3″, wide pressure rating range, EPDM or Teflon discs or pistons.
Slow Closing Anti-Hammering Solenoid Valves
Reduce the disk's closing speed to protect the system from water hammer effects. Piloted, Normally Open, and Normally Closed, Brass or Stainless Steel Body (on request), Connections from 3/4″ to 2″, Buna N seats (standard) and Neoprene, EPDM, PTFE, and FKM (optional on request).
Fuel, Diesel Oil, Gas Oil, Biodiesel, up to 300F
Direct-acting and pilot-operated, normally open and normally closed, brass or stainless steel body (option available), connections from 1/8″ to 3″, wide range of pressure ratings, Viton or Teflon seats and seals.
Cryogenic Solenoid Valves up to -200C (-328F) Liquid Nitrogen and CO2
Direct-acting and pilot-operated, normally open and normally closed, brass or stainless steel body (option available), connections from 1/8″ to 2″, wide range of pressure ratings, PTFE seats, and seals.
Shut-Off Valves: Normally Closed for Fuel Gas, up to 176F
Two-way solenoid valves to shut off the flow of fuel gas when not energized. Cannot be shut off. Direct-acting, normally closed, brass, or aluminum body, connections from 1/8″ to 3″, wide range of pressure ratings, Buna N seats, and seals.
Gas Vent Valves
Normally open for fuel gas, up to 176F Two-way solenoid valves to vent fuel gas, such as natural gas and propane, when not energized. Direct-acting, Normally Open, Aluminum Body (Brass on request), Connections from 1/2″ and 3/4″ (other sizes on request), Buna N seats, and seals.
Solenoid Valves for Heavy Oil
Especially used in Combustion Systems with heavy hydrocarbons like fuel oil, heated or not. Direct-acting, normally open and normally closed, brass, bronze, or stainless steel body (option on request), connections from 3/8″ to 1″, wide range of nominal pressures, stainless steel, and Teflon seats.
"Free Handle" Manual Reset Shut-Off Valve
The valve closes when the coil is de-energized. The free-handle mechanism prevents the valve from opening until the solenoid is activated and manually triggered. Direct-acting, Normally Closed, Aluminum Body, Connections from 1″ to 3″, Buna N seats, and seals.
Cryogenic Solenoid Valves up to -200C (-328F) Liquid Nitrogen and CO2
Direct-acting and pilot-operated, normally open and normally closed, brass or stainless steel body (option available), connections from 1/8″ to 2″, wide range of pressure ratings, PTFE seats, and seals.
Three-Way / Two-Position Solenoid Valves
To alternately apply pressure and release pressure from a spring-return actuator valve or a single-acting spring-return cylinder. Normally Closed, Normally Open, or Universal. Brass or Stainless Steel Body (option available), connections from 1/4″ to 3/4″, wide range of pressure ratings, Buna N and FKM Viton seats, and seals.
Four-Way / Two-Position Solenoid Valves
To alternately apply pressure and release pressure from a double-acting valve actuator. Four-way 5-port 2-position solenoid valve. Single solenoid spring return, pneumatic return, bistable double solenoid. Aluminum, Brass, or Stainless Steel Body (option available), connections from 1/4″ to 1/2″, wide pressure range from 15 to 150 psi, Buna N and Viton seats, and seals. Standard or with Teflon coating for dry air.
Valve Automation
Direct mounting NAMUR valves for single or double-acting actuators and cylinders. 3/2 or 4/2 configurations that mount directly onto the actuator. Brass Body, Buna N Seats. Direct mounting eliminates the need to connect the valve to the actuator.
NGV Shut-Off Valve (CNG) 4500 PSI
Two-way shut-off valve to control compressed natural gas (CNG) for vehicles. Direct-acting, Normally Closed, Stainless Steel Body, 1/4" NPT, orifice 3/32", pressure up to 4500 psi, seat, and seal in PTFE.
Pulse Valves
For dedusting of bag filters, cartridges, ceramic filters, and sinter metal filters. Highly efficient dust removal with extremely low compressed air consumption. Available in Normally Open or Normally Closed configuration, aluminum body, connection from 3/4" to 3", Viton seats, and seals.
Low-Temperature Valves
Direct-acting or pilot-operated valves with brass or stainless steel body, available in Normally Closed or Normally Open configurations. Suitable for handling fluids at low temperatures, connections from 1/8" to 3", seats, and seals made of materials suitable for low temperatures like PTFE or Viton.
